穿越小说完本,天蚕土豆

蘇州工業園區翔宇電子有限公司

化學用品一站式服務????

化工生產銷售?????

熱點詞推薦：

公司介紹

蘇州工業園區翔宇電子有限公司以電子、工業膠水、膠粘劑銷售為基礎。為了更便捷地服務中國、日本、韓國及東南亞地區的亞洲客戶，2012年依托自主品牌迪泰，引進國外大包裝至中國煙臺自己的分裝工廠進行分裝，后期逐漸把大部分產品國產化，經過多年的不斷努力，迪泰品牌的膠黏劑和接合技術在該領域也得到很多大型公司的認可，為客戶提供最有價值的解決方案和最優質的服務。我們的業務已經擴展到：拉美，印度，和歐洲；

在產品方面迪泰成功的開發了各類光固化膠（UV 膠）、結構膠、熱熔膠、密封膠、三防膠、灌封膠、導電膠等系列粘合劑，保證在同行業的競爭中始終處于領先地位；我們擁有豐富的工程應用方案經驗，涉及光學、電子制造業、醫療機械、石油等行業，能夠及時為客戶解決問題，提供方案，并為客戶創造最高價值。我們?yōu)槟峁┑牟粌H僅是粘合劑，我們更是您身邊的伙伴，迪泰每時每刻都在您需要的地方，以我們最專業的技術和最飽滿的熱情與您一起發展；我們正以多元化的產品在眾多不同領域的應用與現代化工業與時俱進。

我們在這里，您的身邊。

如有需求，請聯系迪泰經銷商

人才

為本?

科技

為先?

品質

為上

信譽

為重

產品展示

DEDT 8416瞬干膠

瞬干膠

市場價:0.00

價格:0.00

PRODUCT DESCRIPTIONDEDT 8416 a low viscosity surface insensitive cyanoacrylateadhesive. Product 8416 is specifically formulated to rapidlybond difficult substrates and to perform in lower humiditysituations. (Mil-A-46050C Type II, Class I).TYPICAL PROPERTIESEster Base ethyl-2-cyanoacrylateAppearance Clear, colourlessFlashpoint >80°CDensity 1,05Shelf Life 12 months, unopenedViscosity (Brookfield) @ 25°C 1300-1500cP(Spindle 1, 20rpm)POLYMER PROPERTIESAppearance Clear, colourlessSoftening Point c. 125°CRefractive Index, nD20 1,45Full Cure Time 24 hoursSolubility DMF, acetonitrile, acetoneCURED SPEED VS. SUBSTRATEBalsa / Balsa <5 secondsRubber / Rubber <5 secondsNitrile / Nitrile <5 secondsNeoprene / Neoprene <5 secondsEPDM / EPDM <5 secondsSteel / Steel 10-20 secondsPVC / PVC 3-10 secondsPolycarbonate / Polycarbonate 10-40 secondsCURED SPEED VS. GAPThe rate of cure will depend on the bondline gap. Thinbondlines result in high cure speeds, increasing the bond gapwill decrease the rate of cure.CURED SPEED VS. ACTIVATORWhere cure speed is unacceptably long due to large gaps,applying activator to the surface will improve cure speed,However, this can reduce ultimate strength of the bond andtherefore testing is recommended to confirm effect.SHEAR STRENGTHGrit Blasted Steel >15 N/mm2Etched Aluminium >11 N/mm2Nitrile Rubber >10 N/mm2Polycarbonate >12 N/mm2ABS 6~18N/mm2PVC 6~18N/mm2DIRECTIONS FOR USEFor best results the surface must be clean and free fromoil ,grease, rust and other contamination. Best results withDEDT adhesive are obtained by using the minimum amount ofadhesive needed to fill the gap between the two matingsurfaces. Apply firm pressure to mated surfaces until adhesivesets.BLOOMING/CHLOROSISVapor generated by uncured liquid adhesive can be depositedon nearby surfaces leaving a white residue. The condition canbe reduced using one or more of the following methods:Clean with DEDT 755.Reduce quantity of the adhesive used.Increase the airflow.Speed the fixture/cure of the adhesive by using an accelerator.PRODUCT STORAGEStore product in the unopened container in a dry location.Optimal storage:2℃ to 8℃. Keep container tightly capped. Ifstored at low temperature, product must be allowed to returnto room temperature before use, This normally takes 8 to12hours.DISCLAIMERThe data contained within this Technical Data Sheet arefurnished for information only and are believed to be reliableat the time of issue. We cannot assume responsibility forresults obtained by others over whose methods we have nocontrol. It is the responsibility of the customer to determinethe products suitability for use. DEDT Limited and itsassociated companies accept no liability arising out of the useof this information or the products described herein.
DEDT 835瞬干膠

瞬干膠

市場價:0.00

價格:0.00

PRODUCT DESCRIPTIONDEDT 835 a high viscosity low-odour, low-bloom cyanoacrylate adhesive. The product has a rapid cure rate and issuitable for porous substrates or where gap fill may be required.TYPICAL PROPERTIESEster Base Alkoxy-ethyl cyanoacrylateAppearance Clear, colourlessFlashpoint >81°CDensity 1.10Shelf Life 12 months, unopenedViscosity (Brookfield) @ 25°C 850-1250cPs(Spindle 1, 20rpm)POLYMER PROPERTIESAppearance Clear, colourlessSoftening Point c. 100°CRefractive Index, nD20 1,45Full Cure Time 24 hoursSolubility DMF, acetonitrile, acetoneCURED SPEED VS. SUBSTRATEBalsa / Balsa 15- 20 secondsRubber / Rubber <7 secondsNitrile / Nitrile <7 secondsNeoprene / Neoprene <7 secondsEPDM / EPDM <7 secondsSteel / Steel 20-40 secondsPVC / PVC 20-40 secondsPolycarbonate / Polycarbonate 20-50 secondsCURED SPEED VS. GAPThe rate of cure will depend on the bondline gap. Thin bondlines result in high cure speeds, increasing the bond gapwill decrease the rate of cure.CURED SPEED VS. ACTIVATORWhere cure speed is unacceptably long due to large gaps, applying activator to the surface will improve cure speed,However, this can reduce ultimate strength of the bond and therefore testing is recommended to confirm effect.SHEAR STRENGTHGrit Blasted Steel >14 N/mm2Etched Aluminium >10 N/mm2Nitrile Rubber >4 N/mm2Polycarbonate >3 N/mm2Technical Data Sheet835ABS >6N/mm2PVC >2N/mm2DIRECTIONS FOR USEFor best results the surface must be clean and free from oil ,grease, rust and other contamination. Best results withDEDT adhesive are obtained by using the minimum amount of adhesive needed to fill the gap between the twomating surfaces. Apply firm pressure to mated surfaces until adhesive sets.PRODUCT STORAGEStore product in the unopened container in a dry location. Optimal storage:2℃ to 8℃. Keep container tightly capped.If stored at low temperature, product must be allowed to return to room temperature before use, This normally takes 8to12 hours.DISCLAIMERThe data contained within this Technical Data Sheet are furnished for information only and are believed to be reliableat the time of issue. We cannot assume responsibility for results obtained by others over whose methods we have nocontrol. It is the responsibility of the customer to determine the products suitability for use. DEDT Limited and itsassociated companies accept no liability arising out of the use of this information or the products described herein.
DEDT 1770處理劑

處理劑

市場價:0.00

價格:0.00

PRODUCT DESCRIPTIONDEDT activator 1770 is a single component non CFC solvent base product, formulated toprovide a faster cure on acicdic surfaces and cure excess DEDT cyanoacrylate adhesive outsidethe bond lines. The product is highly flammable.TYPICAL APPLICATIONSDEDT 1770 is used to increase the cure speed of DEDT cyanoacrylate adhesive. It can beeither pre-or post-applied to the bond. It is especially suited for post application on exposedcyanoacrylate adhesive outside of the bond line.POLYMER PROPERTIESSolvent AcetoneChemical Base Organic AcceleratorAppearance Clear to amberSpecific Gravity 0.79Viscosity (at 25°C) (mPa.s) 0.4Flash Point (TCC) °C -17Dry time (at 20°C) seconds <30PRODUCT BENEFITS* Improves the gap filling capability of cyanoacrylate adhesive.* Reduce Fixture time.* Has zero ozone depletion potential.TYPICAL PERFORMANCEFixture time and cure speed achieved as a result of using DEDT 1770 depend on the adhesiveused and substrate bonded.HANDLING PROCEDURESDEDT 1770 is highly flammable.The solvent may effect certain plastics or coatings. It is recommended that the user check allsurfaces for compatibility before use.DIRECTIONS FOR USE1. Apply DEDT cyanoacrylate adhesive to one of the surfaces to be bond and assemble.2. Apply DEDT 1770 over all exposed cyanoacrylate adhesive by spray or by drop. Use oneLaboratory Data SheetA professional adhensive supplier DEDT New materials（HK）CO.,LTDdrop of activator per one drop of exposed adhesive.3. Apply the DEDT cyanoacrylate product immediately after drying but not more than 50seconds thereafter.4. Apply accelerator again if a delay of more than 45 seconds between original activation andadhesive application.PRODUCT STORAGEDEDT 1770 is classified as highly flammable and must be stored in an appropriate manner incompliance with relevant regulations. Do not store combustible materials. Optimal storage: 8℃to 21℃.DISCLAIMERThe data contained within this Technical Data Sheet are furnished for information only and arebelieved to be reliable at the time of issue. We cannot assume responsibility for results obtainedby others over whose methods we have no control. It is the responsibility of the customer todetermine the products suitability for use. DEDT Limited and its associated companies acceptno liability arising out of the use of this information or the products described herein.
DEDT AC9促進劑

處理劑

市場價:0.00

價格:0.00

一、簡介AC49 是一款厭氧膠專用底劑。用于加快厭氧膠的固化速度。二、適用范圍粘接表面為不活潑金屬、惰性表面或粘接間隙較大或需要快速固化的場合時適用。三、技術參數主要化學成分：酮有效化學成份：銅鹽&胺顏色：綠色色透明粘度：極低比重： 0.79干燥時間： 30-70s有效時間： ≤30 天具體的固化速度與所用的厭氧膠的類型及粘接材質均有關系。以上數據均為在25℃/50±5%條件下測得。四、注意事項本品為易燃品，依據當?shù)胤蛇M行儲存及運輸。與厭氧膠分開儲存和運輸，以防使厭氧膠固化變質。溶劑對某些塑料基涂層有腐蝕，選用前請先確認對工件無損害。五、一般性常識該產品不能用于純氧或富氧體系。也不能用來封存氯氣等具有強氧化性的物質。不要將取出后的膠液倒回原包裝，以防污染原液。工作場所應通風良好，或強制通風。六、包裝鋁瓶--------------------------------1L七、儲存8-28℃下，于陰涼干燥處密閉保存，遠離火源，遠離厭氧膠。保質期為24 個月。八、使用方法本品為厭氧膠專用底劑：先將本品涂于預接合件表面，晾干后，再在未噴底劑的粘接面涂厭氧膠，快速接合粘接件。
DEDT 1050AB膠

AB膠

市場價:0.00

價格:0.00

PRODUCT DESCRIPTIONDEDT H-1050 is a toughened , medium high viscosity , rapid curing industrial grade epoxystructural adhesive with excellent strength. Once mixed , the two-component epoxy cures atroom temperature which provides high peel resistance and high shear strength to a wide varietyof materials including plastics , metals , glass and ceramics. It’s high transparency , highpermeability , and rapid curing at lower temperature characteristics , makes it suitable for manybonding applications.PROPERTIES OF UNCURED MATERIALResin HardenerChemical type Epoxy AmineAppearance Clear liquid Slight yellow liquidSpecific Gravity@25℃ 1.17 1.12Viscosity @25℃ , cps 12000+5000cps 12000+5000cpsFlash point(TOC) , ℃ >90℃ >200℃Mix Ratio (R : H) 1 : 1 (by weight)Working life @25℃ 5-8 min.Initial curing time , 5g@25℃ 15 min.PROPERTIES OF CURED MATERIALFully curing time @25℃ 3 days25℃/24hr 80℃/Water absorption rate , ℃/24hr 97℃/1.5hr%2.6 9.06 5.77Thermal degradation temperature , (TGA10°C/min) , °C 332Thermal expansion constant , (110~170°C) , μm/m/°C 210Thermal conductive constant , w/mK 0.3Hardness ASTM D-1706 , Shore D 84H-1050Technical data sheetGlass transition temperature , Tg , ℃ 52Volume resistivity, ASTM D257 5 x 1015Ω.cmSurface resistivity, ASTM D2575 x 1014ΩDielectric constant & loss, 25°C, ASTM D150 ,measured at 100Hz 4.1(loss0.02)Bonding intensity , room temperature 7 days , JIS K6850 , Kg/cm2 207DIRECTION FOR USE1. For best performance surfaces should be clean and free of grease. Removal of surfacecontaminates such as paints , oxide films , oils , dust , mold release agents before bonding.2. Use gloves to minimize skin contact and keep the work environment in an good air flowingstatus.3. Mix thoroughly by weight in the proportions. Mix vigorously approximately 1~3 minutes afteruniform color is obtained. Keep parts from moving during cure. Contact pressure isnecessary.4. Excess uncured adhesive can be cleaned up with ketone type solvents.STORAGEOptimal storage is in a cool , dry location at a temperature between 8°C to 28°C. Shelf life canbe 1 year under 25℃ storage.NOTEThe data contained herein may be reported as a typical value and/or range (based on the mean value ±2standard deviations). Values are based on actual test data and are verified on a periodic basis. The datacontained herein are furnished for information only and are believed to be reliable. We cannot assumeresponsibility for the results obtained by others over whose methods we have no control. We recommend thateach prospective user test his proposed application before repetitive use.
DEDT3215

厭氧膠

市場價:0.00

價格:0.00

<h1>PRODUCT DESCRIPTION</h1>DEDT 3215 is a single component anaerobic threadlocking material, which is develops high strength. The product cures when confined in the absence of air between close fitting metal surfaces. <h5>TYPICAL APPLICATIONS</h5>* Prevents loosening and leakage of threaded fasteners.* Cylinder liner studs.* Air compressor fasteners.* Refrigeration safety valves.                                                                                                                                                                                            <h5>POLYMER PROPERTIES</h5>TypicalValue        RangeChemical Type                                                                 Dimethacrylate esterAppearance                                                                   Blue liquidSpecific Gravity                                                               1.1Viscosity (at 25°C) (mPa.s)                                               7000       5000 to 9000Flash Point (TCC) °C                                              >93 <h5>CURE SPEED VS. SUBSTRATE</h5>The rate of cure will depend on substrates involved.Substrate                                                                   Fixture time/Full cureSteel                                            30min/24hrsBrass                                            40min/24hrsZn Dichromate                                    50min/24hrs<h6>Stainless Steel                                     60min/24hrs</h6><h6> </h6><h6>CURE SPEED VS. BOND GAP</h6>The rate of cure will depend on the bondline gap. Thin bondlines result in high cure speeds, increasing the bond gap will decrease the rate of cure.<h1> </h1><h1>CURE SPEED VS. ACTIVATOR</h1>Where cure speed is unacceptably long due to large gaps, applying activator to the surface will improve cure speed, But may also impair overall adhesive performance and therefore testing is recommended to confirm effect. <h6>CURE SPEED VS. TEMPERATURE</h6>The rate of cure will depend on the ambient temperature. High temperature tend to increase the speed.TYPICAL PROPERTIES(CURE)After 24hr at 22℃ on M10 steel nuts and bolts (N.m).  TypicalValue       RangeBreakaway Torque                                                             31         25~35Prevailing Torque                                                              35         28~40 <h1>GENERAL INFORMATION</h1>This product is not recommended for use in pure oxygen or rich systems and should not be selected as sealant for chlorine or other strong oxidizing materials.Where aqueous washing systems are used to clean the surfaces before bonding. It is important to check for compatibility of the washing solution with the adhesive. In some case, these aqueous washes can affect the cure and performance of the adhesive.This product may not be compatible with plastics, (particularly thermoplastic materials where stress cracking of plastic could result). Users are advised to confirm compatibility of the product with such substrates. <h1>DISASSEMBLY AND CLEANUP PRODUCT</h1>To aid in disassembly, DEDT anaerobic compounds can be weakened by heating to at least 260℃. Once disassembled ,cured adhesive can removed with DEDT Gasket Remover1790 by following instructions. A solvent wipe with an organic or petroleum solvent will remove uncured adhesive outside the joint. PRODUCT STORAGE Product should be stored in a cool, dry location in unopened containers at a temperature between c between 46℉ (8℃) to 82℉ (28℃) unless otherwise stated. To prevent contamination of unused product, do not return any material to its original container. DISCLAIMERThe data contained within this Technical Data Sheet are furnished for information only and are believed to be reliable at the time of issue. We cannot assume responsibility for results obtained by others over whose methods we have no control. It is the responsibility of the customer to determine the products suitability for use. DEDT New materials Limited and its associated companies accept no liability arising out of the use of this information or the products described herein.
DEDT3242

厭氧膠

市場價:0.00

價格:0.00

PRODUCT DESCRIPTIONDEDT 3242 is a single component anaerobic threadlocking material, which is thixotropic and developsmedium strength . The product cures when confined in the absence of air between close fitting metalsurfaces.TYPICAL APPLICATIONS*Prevents loosening and leakage of threaded fasteners.*Pump and motor mounting bolts.*Engine rocker nut*Situations were disassembly with hand tools is required.POLYMER PROPERTIESTypicalValue RangeChemical Type Dimethacrylate esterAppearance Blue liquidSpecific Gravity 1.05Viscosity(at 25°C)(mPa.s) 2000 1200 to 2800Flash Point(TCC) °C >93CURE SPEED VS. SUBSTRATEThe rate of cure will depend on substrates involved.Substrate Fixture time/Full cureSteel 15min/24hrsBrass 20min/24hrsZn Dichromate 30min/24hrsStainless Steel 40min/24hrsCURE SPEED VS. BOND GAPThe rate of cure will depend on the bondine gap. The bondlines result in high cure speeds, increasing thebond gap will decrease the rate of cure.CURE SPEED VS. ACTIVATORWhere cure speed is unacceptably long due to large gaps, applying activator to the surface will improvecure speed, But may also impair overall adhesive performance and therefore testing is recommended toconfirm effect.CURE SPEED VS. TEMPERATUREThe rate of cure will depend on the ambient temperature. High temperature tend to increase the speedTYPICAL PROPERTIES(CURE)After 24hr at 22℃ on M10 steel nuts and bolts(N/mm2)TypicalValue RangeBreakaway Torque 19 14~25Prevailing Torque 8 4~11GENERAL INFORMATIONThis product is not recommended for use in pure oxygen rich systems and should not be selected as sealantfor chlorine or other strong oxidizing materials.Where aqueous washing systems are used to clean the surfaces before bonding. It is important to check forcompatibility of the washing solution with the adhesive. In some case, these aqueous washes can affect thecure and performance of the adhesive.This product may not be compatible with plastics,(particularly thermoplastic materials where stresscracking of plastic could result). Users are advised to confirm compatibility of the product with suchsubstrates.DIRECTIONS FOR USEFor best results, surfaces should be clean and free of grease. 3243 should be applied to the bolt in adequatequantity to fill all engaged threads. 3243 performs best in thin bond gaps, (0.05mm). Very large thread sizesmay create large gaps which will affect cure speed and strength. This product is designed to give controlledfriction, (torque/tension ratio), during assembly. In cnitical tightening applications this ratio should beconfirmed.PRODUCT STORAGEProduct should be stored in a cool, dry location in unopened containers at a temperature between containersat a temperature between 46℉ (8℃)and 82℉ (28℃)unless otherwise stated. To prevent contamination ofunused product, do not return any material to its original container.DISCLAIMERThe data contained within this Technical Data Sheet are furnished for information only and are believed tobe reliable at the time of issue. We cannot assume responsibility for results obtained by others over whosemethods we have no control. It is the responsibility of the customer to determine the products suitability foruse. DEDT Limited and its associated companies accept no liability arising out of the use of thisinformation or the products described herein.
DEDT3217

厭氧膠

市場價:0.00

價格:0.00

<h1>PRODUCT DESCRIPTION</h1>DEDT 3217 is a single component anaerobic threadlocking material, which is develops high strength. The product cures when confined in the absence of air between close fitting metal surfaces. <h5>TYPICAL APPLICATIONS</h5>* Prevents loosening and leakage of threaded fasteners.* Cylinder liner studs.* Air compressor fasteners.* Refrigeration safety valves.                                                                                                                                                                                            <h5>POLYMER PROPERTIES</h5>TypicalValue        RangeChemical Type                                                                 Dimethacrylate esterAppearance                                                                   Red liquidSpecific Gravity                                                               1.1Viscosity (at 25°C) (mPa.s)                                               7000       5000 to 9000Flash Point (TCC) °C                                              >93 <h5>CURE SPEED VS. SUBSTRATE</h5>The rate of cure will depend on substrates involved.Substrate                                                                   Fixture time/Full cureSteel                                            30min/24hrsBrass                                            40min/24hrsZn Dichromate                                    50min/24hrs<h6>Stainless Steel                                     60min/24hrs</h6><h6> </h6><h6>CURE SPEED VS. BOND GAP</h6>The rate of cure will depend on the bondline gap. Thin bondlines result in high cure speeds, increasing the bond gap will decrease the rate of cure.<h1> </h1><h1>CURE SPEED VS. ACTIVATOR</h1>Where cure speed is unacceptably long due to large gaps, applying activator to the surface will improve cure speed, But may also impair overall adhesive performance and therefore testing is recommended to confirm effect. <h6>CURE SPEED VS. TEMPERATURE</h6>The rate of cure will depend on the ambient temperature. High temperature tend to increase the speed.TYPICAL PROPERTIES(CURE)After 24hr at 22℃ on M10 steel nuts and bolts (N.m).  TypicalValue       RangeBreakaway Torque                                                             31         25~35Prevailing Torque                                                              35         28~40 <h1>GENERAL INFORMATION</h1>This product is not recommended for use in pure oxygen or rich systems and should not be selected as sealant for chlorine or other strong oxidizing materials.Where aqueous washing systems are used to clean the surfaces before bonding. It is important to check for compatibility of the washing solution with the adhesive. In some case, these aqueous washes can affect the cure and performance of the adhesive.This product may not be compatible with plastics, (particularly thermoplastic materials where stress cracking of plastic could result). Users are advised to confirm compatibility of the product with such substrates. <h1>DISASSEMBLY AND CLEANUP PRODUCT</h1>To aid in disassembly, DEDT anaerobic compounds can be weakened by heating to at least 260℃. Once disassembled ,cured adhesive can removed with DEDT Gasket Remover1790 by following instructions. A solvent wipe with an organic or petroleum solvent will remove uncured adhesive outside the joint. PRODUCT STORAGE Product should be stored in a cool, dry location in unopened containers at a temperature between c between 46℉ (8℃) to 82℉ (28℃) unless otherwise stated. To prevent contamination of unused product, do not return any material to its original container. DISCLAIMERThe data contained within this Technical Data Sheet are furnished for information only and are believed to be reliable at the time of issue. We cannot assume responsibility for results obtained by others over whose methods we have no control. It is the responsibility of the customer to determine the products suitability for use. DEDT New materials Limited and its associated companies accept no liability arising out of the use of this information or the products described herein.